|
Click on the item you wish to see.
Star Warning /Signal Vehicle Products
DLX4 & DLX6
|
LDK396 & LDK395 Series LED Rectangular Light Kits
LDH396 LDH395
l Micro-controlled solid state flasher
l Rated for over 100,000 hours of use
l Protected against moisture and contaminates
l Protected against voltage spikes
l High impact resistant polycarbonate housing
l Vibration resistant LED technology
l Ideal for police, fire, construction, utility, DOT and municipal vehicles
l Two selectable warning flash patterns: Alternating or Random
l 0.8 amp draw at 12 VDC
l Colors: Amber, Red, Blue
l Dimensions: LDH396 - 2 1/2"L x 6 1/2"W x 3 1/2"H LDH395 - 2 1/2"L x 5"W x 2 3/4"H
l Kit includes: (1) set of 2 LED heads with mounting brackets ( One master unit with flasher and one slave unit), (1) SP3860-LDF switch panel and instructions.
|
SP3860-2
LDK395 Kit
Amber/Amber $ 155.50 Amber/Red $ 161.50
Red/Red $ 167.50 Amber/Blue $ 184.00
Red/Blue $ 190.00 Blue/Blue $ 212.50
LDK396 Kit
Amber/Amber, Amber/Red or Red/Red $ 404.50
Amber/Blue or Red/Blue $ 436.00
Blue/Blue $ 467.50
|
Self-Contained Flashing LED Heads
Model LDHEF-4
Model LDHEF-6
l Random or alternating selectable flash sequence
l "Potted", solid state components - rated for over 100,000 hours of use
l Extremely low amp draw - less than 0.8 amps
l Protected against moisture, contaminates and voltage spikes
l High impact resistant polycarbonate housing
l Meets SAE J1318 and J845
l Ideal for fire, police, construction, utility, DOT and municipal vehicles
l 12/24 VDC, 72 flashes per minute (Quint)
LDHEF-4 Amber or Red $ 68.70 Blue or Clear $ 114.60
LDHEF-6 Amber or Red $ 68.70 Blue or Clear $ 114.60
Self-Contained Round Flashing LED Light Kit
Kit Pricing: Amber / Amber, Amber / Red or Red / Red $ 150.00
Amber / Blue, Red / Blue, Amber / Clear or Red / Clear $ 190.80
Blue / Blue, Clear / Red or Blue / Clear $ 236.70
Head Pricing: Amber or Red $ 76.00 Blue or Clear $ 122.00
|
Kit Model LDHEF-3K(with Built in Flasher)
l Random or alternating selectable flash sequence
l "Potted", solid state components - rated for over 100,000 hours of use
l Extremely low amp draw - less than 0.8 amps
l Protected against moisture, contaminates and voltage spikes
l High impact resistant PAR 36 rubber housing
l Meets SAE J1318 and J845
l Ideal for fire, police, construction, utility, DOT and municipal vehicles
l 12/24 VDC, 72 flashes per minute (Quint)
l Dimensions: 4 3/4" D x 2 1/2" L
l Kit includes: (2) LDHEF-3 LED heads with mounting brackets and instructions
l Colors: Red Amber Clear Blue
|
Remote LED Heads
LDH394 Price: $ 73.50
LDH394D-C - DOT approved clear back-up light Price: $ 102.75
LDH392 Price: $ 58.00
LDH392D-C - DOT approved clear back-up light Price: $ 102.75
STARBURST DL SERIES LIGHTS
l High Intensity STAR Generation 3 LED's
l Only 1 1/2" Tall (Excluding mounting bracket) 6" or 11" Lengths
l Rotationally adjustable
l Three Mounting Options: Suction cups, 2 7/8" perm. mount legs, 5" perm. mount legs (mount over third brake light)
l Current limit protection over entire operating voltage & reverse polarity protection
l Waterproof versions available for exterior vehicle use
l Custom selectable flash paterns: 6" unit - 30 patterns, 11" unit - 36 patterns, 6" Kit (two 6" units) - 3 patterns
l Operating Voltage 10 - 16 VDC, 6" - 0.8 Amps 11" - 1.6 Amps
Approvals: SAEJ595, SAEJ1318, and California Title 13 for RED and BLUE Color Combinations
l Colors: Amber Red Green Clear Blue
DL15-6 Suction Cup Mount & Cigarette Lighter Plug
|
|
Amber, Red or Red/Amber Price: $ 160.50
Green or Blue Price: $ 175.50
Red/Blue, Red/White or Amber/Blue Price: $ 168.00
|
DL15-6W Weatherproof with 12' Cables and Permanent Mounts
|
|
Amber, Red or Red/Amber Price: $ 184.50
Green or Blue Price: $ 199.50
Red/Blue, Red/White or Amber/Blue Price: $ 192.00
|
DL15-12 Suction Cup Mount & Cigarette Lighter Plug
|
|
Amber, Red or Red/Amber
Price: $ 292.50
Green or Blue Price: $ 322.50
Red/Blue, Red/White or Amber/Blue Price: $ 307.50
|
DL15-12W Weatherproof with 12' Cables and Permanent Mounts
Amber, Red or Red/Amber Price: $ 300.00
Green or Blue Price: $ 330.00
Red/Blue, Red/White or Amber/Blue Price: $ 315.00
DL15-6MMB Interior Mirror Mount with Cigarette Lighter Plug
|
|
Amber, Red or Amber/Red Price: $171.95
Clear, Blue, Green or Combination Price: $186.95
1/2 Amber or Red and 1/2 Clear, Blue or Green Price: $179.50
|

Starburst
DLX3
Weather resistant housing
Interior or exterior mounting
High intensity, STAR Generation-3 LEDs
Synchronizing capability
Reverse polarity protection
Current limit protection over entire operating voltage
6 Customer selectable flash patterns including a Steady-On (11 Customer selectable flash patterns including a Steady-On when two DLX3s are synchronized)
Selectable Day/Night mode
3 Five conductor wire harness
Dimensions: 1-3/16 H x 4 W x 2 D Voltage: 10V - 16V DC Amp Draw: Less than 1 Amp
Approvals*: SAE J595, SAE J1318, and California Title 13 for RED and BLUE (*When two DLX3s are used as a pair)
Colors: Amber, Blue, Red, White, Green
|
The STARBURST DLX3 series LED auxiliary light is a small and powerful weather resistant package perfect for mounting on motorcycle saddlebags, in trunks, on vehicle fenders, mirrors, or any place a small intense LED light is needed. Using STAR generation-3 LEDs it has current limit protection over the entire operating voltage and reverse polarity protection gives you worry free operation. The STARBURST DLX3 is offered in a variety of colors and they can be synchronized with other STARBURST DLX3s. High/Low power select and 11 different customer selectable flash patterns are available, including a Steady On, for many customized possibilities. Ships complete with five 3' attached wires, gasket, and instructions.
|
DLX3 Accessory Mounts
|
|
|
|
|
|
274-DLX3D
|
274-DLX3RL
|
274-DLX3T
|
274-DLX3U
|
274-DLX3W
|
Deck Mount
|
License Plate Mount
|
Inside Trunk Mount
|
Standard "L" Bracket Mount
|
Pickup Rear (Flat Glass) Mount
|
|
|
|
 |
|
 |
274-DLX3-2X1
|
274-DLX3-1X2
|
 |
 |
 |
Stack Mount
|
Side By Side Mount
|
 |
 |
 |
DLXT Series Thinline Perimeter LED Warning Lights
Only ½ thick!
Weather resistant housing
Fully encapsulated circuitry
Interior or exterior surface mounting or with optional mounting brackets
Available with Black or Chrome bezels (Order DLXT1X5-*1C or DLXT1X5-*4C for LED Light with Chrome Bezel)
High intensity, PLCC4 LEDs
Synchronizing capability (will also synchronize with STAR DLX3 Auxiliary LED lights or other STAR LED units)
Reverse polarity protection
Current limit protection over entire operating voltage 11 Customer selectable flash patterns including a Steady-On (21 Customer selectable flash patterns including a Steady-On when two DLXTs are synchronized)
|
Dimensions: 2-1/4 H x 5-3/4 W x 1/2 D
Voltage: 10V - 16V DC
Amp Draw: Less than 1 Amp
Colors: Amber, Blue, Green, Red, White
Ships complete with mounting hardware, gaskets, and instructions
|
|
|
|
Shown with Black Bezel
|
Shown with Chrome Bezel
|
|
|
DLXT Optional Mounting Brackets
|
|
|
|
|
274-DLXT-RL
License Plate Bracket
|
274-DLXT-U
Universal Mount
|
274-DLXT-T
Trunk Mount
|
274-DLXT-45
45 Degree Mount
|
|
|
|
|
|
274-DLXT-1X2
Side By Side Mount
|
274-DLXT-W
Flat Glass Mount
|
274-DLXT-2X1
Stack Mount
|
 |
Model DLX4 & DLX 6 Versa Star
VersaStar DLX4 Series & DLX6 Series are vesatile LED Warning Lights that are built with fully encapsulated circuitry and can be mounted just about anywhere, interior or exterior! DLX4s & DLX6s are the same size which allows for easy relocation or reconfiguration. The DLX4s are designed for flush or bracket mounting while the DLX6s are designed for bracket mounting only. The DLX6 also incorporates a heavy duty heat sink. Both series include the same snap on bezel or are available with flashback hoods that include either a cig plug adapter or with a 12' wire harness. These high intensity LED lights are reverse polarity protected and current limiting protection over the entire operating voltage is standard. S-LINK SYSTEM is also standard offering synchronizing capability with other STAR LED units along with 21 customer selectable flash patterns that give these LED lights versatility in the field. Optional mounting brackets are available. Ships complete with permanent mounting hardware, gaskets, and instructions
|
DLX4
DLX6
|
Product Features:
 DLX4 LED heads are designed for flush or bracket mounting
 DLX6 LED heads are designed for bracket mounting only
 DLX4 & DLX6 LED heads are the same size
 DLX4 & DLX6 LED heads are interior or exterior mount
 DLX6 LED heads incorporate a heavy duty heat sink
 Snap on, weather resistant bezels
 Flashback hoods available in DLX4 or DLX6 Series and are interior mount only
 S-LINK SYSTEM synchronizing capability with other STAR LED units
 Split color combinations available (excludes DLX4-HK2 & DLX6-HK2 Series)
 Fully encapsulated circuitry
 High intensity, STAR Generation-4 LEDs
 Reverse polarity protection
 Current limit protection over entire operating voltage
 21 Customer selectable flash patterns; including Steady-On
 Dimensions: 1 H x 3-5/8 W x 3/4 D (DLX4 & DLX6)
 Voltage: 10V - 30V DC
 Amp Draw: DLX4: 0.7 Amps @ 12V DC, 0.3 Amps @ 24 V DC (max)
Amp Draw: DLX6: 0.9 Amps @ 12V DC, 0.5 Amps @ 24V DC (max)
 Color Combinations: Amber/Amber, Blue/Blue, Green/Green, Red/Red, White/White,
 Amber/Blue, Amber/Red, Amber/White, Red/Blue, Red/White, Blue/White
 Approvals: DLX4: Class I, California Title 13 (Amber, Blue, Red, White)
 Approvals: DLX6: Class I, California Title 13 (Amber, Blue, Red, White, Red/Blue)
|
DL16 & DL16V Rear Deck LED Lights
DL16 & DL16CV (Crown Victoria) 4 Head
Price: $315.00
DL16V-6 & DL16V-6CV (Crown Victoria) 6 Head
Price: $399.95
|
DL16V & DL16V-CV (Crown Victoria) 4 Head
Price: $255.00
 Interior mount only, to any vehicles rear window deck Specifically designed models are available for Ford Crown Victoria: DL16-CV, DL16V-CV, DL16V-6CV no drilling required!
 DL16 Series offers high intensity STAR Generation-3 LEDs DL16V Series offers standard LEDs
 Flashback protection hood
 Expandable up to 8-1/2 to fit around third brake light
 Height adjustable from 1/2 to 1-1/4 above rear deck
 Non-reflective powder coated aluminum housing
 4 or 6 Synchronized flashing heads
 35 Customer selectable flash patterns
 High/Low power select
 Current limit protection over entire operating voltage range
 15 Wire harness
 Reverse polarity protection
 Dimensions: 6-Head: 1-7/8H x 14-5/16L x 5-3/4D Dimentions: 4-Head: 1-7/8H x 20-1/2L x 5-3/4D
 Voltage: 10V-16V DC
 Weight: All less than 4 lbs.
 Amp draw: DL16V & DL16V-6: Less than 1.0 Amp draw: DL16:1.6 Amps
 Approvals: DL16 ONLY: SAE J595, SAE J1318, and California Title 13 for Red & Blue
 Color combinations: Red, Blue, Amber, Green, White
|
|
Model ULB9 Mini Phantom
Undercover Interior LED Light
 Perfect for undercover or unmarked vehicle applications
 Extremely lightweight!
 For interior applications only
 Dash, Deck, Mirror, or Suction Cup mount
 Low profile Less than 1 high
 Available in single or dual colors
 57 long-life LEDs
 24 customer selectable flash patterns via push button switch
 Dimensions: 15/16 H X 9 W X 1-3/8 D
 Voltage: 12V DC
 Weight: less than 1 lb.
 Amp draw: 1.2 Amps max
 Custom lighting color combinations available: Red, Blue, Amber, Green, White
|
|
|
DL35-6 M-Tech Series Dash Light
Specifications:
 Extremely wide light distribution
 Highly efficient optics
 Impact resistant housing
 Flashback hood
 Reverse polarity protection
 Voltage: 12V DC
 Light weight: less than 2 lbs.
 Color Combinations: Red, Blue, Amber, Green, White
 Ships Complete with mounting hardware and instructions
|
DL35-6:
 Cig Plug Adapter w/Lighted On/Off Switch
 35 Customer Selectable Flash Patterns
 Flash Pattern Select Button
 Dual Color Availability
 Amp Draw: 0.4 Amps
 Dimentions: 2" H X 6" W X 5" D
|
DL35-6-1:
 12' Cable
 Synchronizing Capabilities
 4 Flash Phases
 22 Customer Selectable Flash Patterns
 Flash Pattern Select Button
 Dual Color Availability
 Amp Draw: 0.4 Amps
 Dimentions: 2" H X 6" W X 5" D
|
|
M-Tech DL35-12 Series Dash Light
Specifications:
 Extremely wide light distribution
 Highly efficient optics
 Impact resistant housing
 Flashback hood
 Reverse polarity protection
 Voltage: 12V DC
 Light weight: less than 2 lbs.
 Color Combinations: Red, Blue, Amber, Green, White
 Ships Complete with mounting hardware and instructions
|
DL35-12:
 Cig Plug Adapter w/Lighted On/Off Switch
 35 Customer Selectable Flash Patterns (two patterns keep RED side on steady to meet certain state requirements)
 Flash Pattern Select Button
 Single Color for Each Head
 Amp Draw: 0.8 Amps
 Dimentions: 2" H X 12" W X 5" D
|
DL35-12-1:
 12' Cable
 Synchronizing Capabilities
 4 Flash Phases
 21 Customer Selectable Flash Patterns (two patterns keep RED side on steady to meet certain state requirements)
 Flash Pattern Select Button
 Single Color for Each Head
 Amp Draw: 0.8 Amps
 Dimentions: 2" H X 12" W X 5" D
|
|
DL35-CV
 Extremely wide light distribution
 Highly efficient optics
 Impact resistant housing
 No drill mounting
 Quick and easy installation
 Flashback protection hood
 Reverse polarity protection
 Selectable Day/Night mode
 15 Wire harness Flash pattern select wire
 35 Customer selectable flash patterns
 Dimensions: 3 H X 21 W X 7 D
 Voltage: 10V-16V DC
 Amp draw: 0.8 Amps
|
|