RD-1002X   $98.00

The half-coverage shell is constructed of Tenntex Thermo Composite utilizing high pressure compression mold for increased strength

while keeping a light weight helmet.

Complete helmet with shield with not be more than 2 lbs. 8 oz.

Features include:

Quick release nylon tubular chin strap with black rubber chin cup, six and one half inch full-flip polycarbonate face shield .125 thick.

Sizing System:

S/M: 6 3/4 - 7 1/4

L/XL: 7 3/8 - 7 7/8

XXL: 8 - 8 1/8

STANDARDS: Helmet meets or exceeds National Institute of Justice 0104.02

(riot) and 0105.01 (crash) requirements and Department of Transportation

FMVSS-218 (for impact retention only).

Available Accessories:

1. Nape pad (nine inch ballistic nylon snap on nape pad)

2. 1199 Black Drawsting helmet bag

3. 1200 Zippered Utility/Helmet bag with handles 15"X10X8"

4. 1250/GD Bag has Compartment for gas mask and handcuffs, straps for shoulders

or can be used for back pack.

 RD-TAC     $109.00

The half-coverage shell to be constructed of Arimid Fiber Reinforced Thermoplastc composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet with shield shall not exceed 3 lbs.

Features include:

Quick release nylon tublular chin strap with black rubber chin cup, six and one half inch full-flip polycarbonate face shield .125 thick, nine inch

snap on ballistic nylon cervical neck protector.

Sizing System

S/M: 6 3/4 - 7 1/4

L/XL: 7 3/8 - 7 7/8

XXL: 8 - 8 1/8

STANDARDS: Must meet or exceed all applicable industry standards including

National Institute of Just 0104.02 (riot) and 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

Available Accessories:

1. 1199 Drawstring helmet bag, Black

2. 1200 zippered Utility/Helmet bag with handles 15"X10"X8"

3. 1250/GD Bag has Compartment for gas mask and handcuffs, straps can be used to carry on shoulder or carried as a back pack.

 FC-210     $249.00

Full-face/full coverage shell is constructed of lightweight composite material. The shell features and adjustable, six position ratchet anti-fog face shield. The shell design incorporates a modular

jaw piece that can be raised with push of a button that is located under the chin edge of the helmet safely opened or closed with one hand and

locks in place.

Weight approximately 3.5 lbs.

Sizing System:

X-Small: 6 3/4 - 6 7/8, Small: 7 - 7 1/8, Medium: 7 1/4

Large: 7 3/8 - 7 ½, X-Large 7 5/8 - 7 7/8,

STANDARDS: Must meet or exceed all applicable industry standards including National Institute of Justice 0104.02 riot and 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

Available Accessories:

1. QR104 Quick Release Buckle (Echo)

2. 1199 Black Drawstring helmet bag

3. 1200 Zippered Utility/Helmet bag with handles 15"X10"X8"

4. 1250/GD Bag has Compartment for gas mask and handcuffs, straps for

shoulders or can be used for back pack.

 RS-100     $159.95                                 CT-100     $185.95

Tenntex Thermo Composite three-quarter coverage shell with integral visor. Helmet sides flare to accommodate double canister gas masks behind face shield. Most current gas masks can be used

with his helmet.

(RS-100) helmet with not be more than 3 pounds including the shield and

(CT-100) helmet with not be more than 3 pounds 5 ounces fully equipped including the shield grid.

Sizing System:

S/M: 6 3/4 - 7 1/4, L/XL: 7 3/8, and XX-L 8 - 8 1/8

Oversize Helmets 7 7/8 - 8 1/4 Add $15.00 per helmet

STANDARDS: Must meet or exceed all applicable industry standards including National Institute of Justice 0104.02 (riot) and 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

Available Accessories:

1. Nape Pad (nine inch ballistic nylon snap on nape pad)

2. 1199 Black Drawstring helmet bag.

3. 1200 Zippered Utility/Helmet bag with handles 15'X10"X8"

4. 1250/GD Bag has Compartment for gas mask an handcuffs, straps for

shoulders or can be used as a back pack.