PYTHON SERIES II
SPECIAL FEATURES
 The Python utilizes true Digital Signal Processing, whereby it automatically monitors all radar returns in the radar beam, picking out only the offending vehicle with assurance.
 The Python is the easiest traffic radar to use. The remote control contains only the most frequently used functions and can be operated by feel. The pushbuttons on the readout unit are clearly labeled and can be operated with gloved hands.
 The Python contains MPH's exclusive high quality Doppler audio. This court-proven feature gives more information about the target than the "synthesized" audio of the competitors. The volume increases with signal strength, and potentially interfering targets become apparent immediately. The "cosine effect" in the audio pinpoints targets as they approach.
 The reliability and accuracy of the Python are guaranteed by MPH ndustries, serving law enforcement with products like the K-55 and S-80 for over twenty years. The Python is certified by the IACP, which regulary test the radar for conformance to NHTSA radar specifications.
 The Python contains the following controls and functions.
Power on Range Control Test
Moving/Stationary Volume Control Squelch
Patrol Blanking Antenna Standby RFI Detect
Low Voltage Sensing Lock/Release
Front/Rear Antenna Select RS-232 Communication Port
GENERAL SPECIFICATIONS
Power: 10.8 to 16.5 Volts, 0.9 Amps @ 13.6 vdc nominal. Fused cord and
reverse polarity protected.
Speed Range:
Stationary mode: 15 to 209 mph, K band
15 to 200 mph, Ka band
Patrol Speed: 12 to 80 mph, all bands
Moving mode closing speed: 15 to 209 mph closing, K band
15 to 200 mph closing, Ka band
Target Distance: One mile range typical for a regular-sized vehicle. Range
varies with vehicle size, terrain, weather and traffic conditions.
Speed Display: Three LED windows simultaneously display patrol, target and
locked-target speeds. Display brightness adjusts
automatically for ambient light.
Readout Size: 1 3/4 in H, 7 in W, 5 in D (4 2/5 cm H, 17 4/5 cm W, 12 7/10
cm D)
Antennas: All antenna modules consist of a circularly polarized,
seamless, conical horn antenna and shatterproof microwave
lens, contained in a rugged cylindrical aluminum housing. All
waterproof antennas incorporate O-ring seals. The micro-
wave source is a solid state Gunn-effect diode transmitter
with nominal output power level of 12 to 30 milliwatts. The
radiated power density is less than 2 mW/cm2 at 5 cm
distance from antenna. the mixer diode is a Schottky barrier
type rated for 100 mW input power.
Python K Band - Single Antenna $1230.00
Python K Band - Dual Antenna $1330.00
Python Ka Band - Single Antenna $1500.00
Python Ka Band - Dual Antenna $1830.00
Optional Remote Display
PYTHON SERIES II FS
SPECIFICATIONS
Power: 10.8 to 16.5 Volts DC, 0.9 Amps @ 13.6 Volts DC nominal. Fused power cable, reverse polarity
protected.
Speed Ranges:
Stationary Mode: Target 15 to 209 mph in K band
15 to 200 mph in Ka band
Opposite Direction Moving Mode (for patrol speeds in the range of 12 - 80 mph)
Target: 15 mph to 209 mph closing speed in K Band
15 mph to 200 mph closing speed in Ka Band
Same Direction Moving Mode (for patrol speeds in the range of 30 - 80 mph)
Target: Within the range of 30% to 170% of patrol speed, but not target speeds within 3 mph of
patrol speed.
Python FS K or Ka Band - Single Antenna $1695.00
Python FS K or Ka Band - Dual Antenna $2280.00
|